Binatone HAS-450, Instruction Manual

Page: 5 / 42

5
ENGLISH
SPECIAL SAFETY MEASURES
Care should be taken to prevent foreign objects
from entering the appliance as they may cause
motor failure and premature breakdown of the
appliance as well as electric shock.
Never cover the appliance during use. When
using the hairdryer, make sure the air filter is clean
and not blocked.
Switch the appliance off when not in use even if it is for a short
period of time.
Do not use the appliance near a bathtub, washbasin, pool or other
sources of water.
Avoid direct contact between attachments and your skin.
For extra safety we recommend the installation of a residual current
device (RCD) with a tripping current of no more than 30 mA in the
mains circuit of the bathroom. Consult a qualified electrician for
help.
This appliance is equipped with an automatic overheat protection.
When overheated, the appliance will switch itself off. In cases of
overheating unplug the appliance from the wall outlet. Let the
appliance cool down for several minutes and then plug it in again.
DESCRIPTION OF THE
APPLIANCE
1. Hair dryer housing
2. Hair dryer operating mode switch
0 — the appliance is switched off;
1 — warm airflow for light curling and mild hair drying;
2 — hot airflow for strong and intensive hair
curling and drying;
C — cold airflow to fix the styling and preserving
hair elasticity.
3. Curl release button
4. Styling brush
5. Round brush
6. Volumizing attachment (only HAS-455)
7. Hanging loop
8. Rotating power cord
9. Carrying bag
PRIOR TO OPERATION
Thoroughly read these instructions.
Remove all packing materials from the
appliance.
Before using for the first time, make sure that
the voltage indicated on the appliance
corresponds to your mains voltage.