Binatone FBM-311, Instruction Manual

Page: 5 / 28

5
ENGLISH
!
Do not use the appliance if it has mechanical defects (dents,
cracks etc.), get it checked by the nearest authorized service
center.
!
To avoid mechanical defects and damage, take care during
the appliance transportation.
SPECIAL MEASURES FOR USE
! Use tap water and bath salts (oils) that do not
produce foam.
! Never carry water in the appliance above the
“MAX” mark.
!
Do not move the appliance or unplug from the
socket during operation of the appliance.
! Never get into the appliance. Use it only in sitting position.
!
Do not use hydromassage function without water.
! ! ! ! !
Dispose of the water, through the special opening (8)
at the front part of the appliance.
!
To avoid fire or electric shock, do not remove leads designed
for maintenance of the electrical appliance. The electrical ap-
pliance has no elements that require user service.
!
Avoid ingress of water on the regulator of operation mode.
!
If water leaks from the appliance, the appliance should no
longer be used. Contact the nearest service center.
!
It is not advisable to use massage appliance if you have, phle-
bitis, varicose veins, severe leg edema, burns or open wounds,
diseases of the nervous system (for example, sciatica) or dur-
ing pregnancy. In the above cases, we recommend you to
consult your doctor before use of the massage appliance.
!
When in use the appliance has a hot surface. Persons insensi-
tive to heat must be careful when using this appliance.
DESCRIPTION OF APPLIANCE
COMPONENTS
Figure A
1. Case
2. Cap
3. Switch for operation mode:
0 – off
1 – vibration, massage with infrared radiation
2 – hydro-massage with heating
3 – hydro-massage with vibration and infrared radiation
4. Infrared lamp
5. Surface for acupunctural massage
6. Holes for air bubbles
7. Removable massage rollers for intense foot massage
8. Built-in magnets
9. Lip for water disposal
10.Brush for pedicure
11.Pumice stone
12.Rubber feet (
Figure B )
13.Cord storage ( Figure B )