Binatone CI-570, Instruction Manual

Page: 6 / 26

6
BEFORE USING
THE APPLIANCE
X
Wipe it with a soft cloth and put it on a dry
even surface.
X
Before using the appliance make sure that
your hair is completely dry
OPERATING INSTRUCTIONS
1. Place the appliance on a dry smooth hori-
zontal surface.
2. Connect the power cord plug to the electric
mains and press the switch
(7) . The Indicator
light (6) will light up, showing that the appliance
is heating.
3. Wait for the appliance to heat up to the re-
quired temperature (approximately 4 minutes).
4. Select a small lock of hair (approximately 15 mm wide) and
comb it from roots to tips.
5. Switch rotation switch (5) to one of the modes a, b, c.
6. Press the lever (4) to open the hair clip (3). Place the ends of
the hair between the work surface (2) and hair clip (3). Re-
lease the lever (4) to grip the hair.
7. Rotate the barrel (2) by the non-heating tip (1) to wind the
hair onto the work surface. Treat each lock for around 10- 20
seconds.
8. Switch the rotation switch (5) to mode b or opposite the
direction you have wound the hair in.
9. Rotating the barrel (2) carefully release the hair by lifting the
lever (4). Let the hair cool down.
10. Continue operation as described above to style all of your
hair.
11. Always unplug the appliance immediately after use.
Ionization
When this mode is switched on by ionization switch (8), a
stream of negative ions is generated eliminating static electricity
on hair and making the hair softer and shining.
CARE AND CLEANING
1. Unplug the device and wait until it completely
cools down.
2. Use a soft lint free damp cloth to clean the
working surface of the appliance
(2) and the
handle (9) . Do not allow water or other liquids
to get inside the appliance.
3. If you are not going to use the appliance for
some time, then let it completely cool down, and store in a safe
dry place out of reach of children.