Binatone CEJ-3300t, Instruction Manual

Page: 6 / 28

6
Do not take the electric cord out of the socket during operation of
the appliance. You should first turn it off.
After using the appliance let it cool for a few minutes. After that you
can boil water in it again.
DESCRIPTION OF
COMPONENTS
1. Housing
2. Hinged lid
3. Lid opening button
4. Removable filter
5. Water window from both sides
6. On-off switch
7. Power indicator
8. Cord storage base
BEFORE FIRST USE
Remove all packing materials from appliance;
make sure that there are no foreign items in it.
Wash internal surface of kettle with warm soapy
water, rinse carefully and wipe dry. In case of un-
usual odor fill the kettle up to a maximum level with
vinegar solution (1 element of 9 % vinegar per 20
elements of water), let the kettle soak for an hour.
Then wash out the kettle with tap water, boil water in the kettle and pour
it out.
OPERATING INSTRUCTIONS
1. Place the kettle with power base on dry horizon-
tal surface.
2. Lift the kettle off the base (8), open the lid (2) by
pushing the button (3) and fill the kettle with
water.
3. Make sure the water level stays between the
minimum and the maximum marks on the water
gauge
(5) . Do not switch on an empty kettle.
4. Close the lid (2) and replace the kettle on the base (8) .
5. Insert the power cord plug into the wall socket with the same volt-
age as indicated on the appliance.
6. Your kettle uses the new patented technology of changing the color
of an internal light in relation to the water temperature:
Water temperature up to 40° C — blue lighting
Water temperature from 40 to 80° C — yellow lighting
Water temperature 80° C and above — red lighting.
7. To boil water, switch your kettle on by pressing the “On/Off” but-
ton (6) . The “On” indicator (7) will light.
8. After water starts to simmer, the kettle will automatically go off. If
you need to switch your kettle off before it boils, just use the “On/
Off” button
(6) .