Binatone BS-8026, Instruction Manual

Page: 4 / 18

4
Bath Electronic Scales BS8026
Read this instruction carefully before the first use to become
acquainted with operating your new appliance. Please keep
the instruction for further reference.
DESCRIPTION OF PARTS OF
THE APPLIANCE
1. Tray
2. Digital liquid crystal display
3. Battery compartment
4. 1 lithium battery 3V type CR2032
5. Legs of the appliance
6. Weight unit switch (kilograms /pounds).
BEFORE THE FIRST USE
Before the appliance is used for the first
time, remove all packing. Open the battery
compartment
(3) on the platform (1) and re-
move the insulation to release contacts. Move
the weight unit switch
(6) to select the de-
sired units of measurement ( Kg (kilograms),
Lb (pounds).
USE OF THE
APPLIANCE
1. Set the scales on a flat hard horizontal
surface. Do not set the scales on carpets
or other soft surfaces, since it will affect
accuracy of measurements.
2. To turn on the scales, press the tray (1)
with your foot for a short time and wait for
setting of
«00.0» on the display (2).
The scales are ready for operation.
Note : if you stand on the scales earlier, the indication
«Err» will appear. If this happens, start the procedure
again.
3. Stand on the scales, evenly distributing the weight on the tray
(1), and do not move. Wait till the appliance calculates the
result.
4. Get off the tray, and the scales will turn off automatically.
Note : if after adjustment to zero on the display of the scales
(2) you did not put any load on the tray (1) , the
scales will turn off automatically within
approximately six seconds.