pg.4
B-300-HDMATRIX-RCVR
Installation and Users Manual
BASIC CONNECTIONS
CALIBRATION
1.
Distance control:
Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal
level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible
range to short distance.
CAUTION: Inappropriate signal level setting may cause an overpowering issue that would shorten
the product life significantly. Follow the steps below to adjust the distance setting in order to avoid
overdriving.
ADJUSTING FOR DISTANCE
1. Set the distance control to 7 (Weakest).
2. Select a source that is outputting the highest-quality video that will be transmitted over the extender.
If you see flickering or blinking images on the display:
Adjust the signal level from 7 to 0 one step at a time, and stop turning the rotary switch when the audio/
video is playing normally.
B-300-HDMATRIX-RCVR
B-300-HDMATRIX-4x4
HDTV
IR Receiver
Cat5e/Cat6 (Shielded Recommended)
HDMI cable (1m max length)
1
IMPORTANT CONNECTION NOTES!
•
CAUTION:
The IR Receiver 3.5mm jack provides 12V power for IR receivers that can damage flashers and
control systems. Check carefully before plugging an IR Flasher or IR Receiver into the respective IR sockets.
Manufacturer’s Warranty will not cover the damage. See IR Control Connections section for proper cabling.
• To reduce video dropout problems from ceiling fans and other EMI issues, it is strongly recommended
that shielded CAT5e/CAT6 and shielded RJ45 connectors are used with this extender product. “EZ-end”
connectors are not recommended for use with HDMI extenders.
• The transmission distance is subject to the grade of installed cable(s), source device, and display. Any
keystone jack along the transmission path will reduce the transmission performance significantly
• 1 meter or shorter HDMI cable is recommended for connecting the B300-HDMATRIX-RCVR to the display.
Summary of Contents for B-300-HDMATRIX-RCVR
Page 8: ... 2011 Binary 111215 ...
