15
ATTENTION!
Before performing maintenance or cleaning, make sure that the on/off switch is in the "0"
(off) position and the plug is disconnected from the power grid.
ATTENTION!
Do not use a water jet to clean the appliance.
IMPORTANT
This equipment is not intended to be fully immersed in water for cleaning.
Follow the instructions below to find out which parts can be immersed and the special care
to be taken with the other parts.
To sanitize the cup, follow the instructions below:
• With the lever pressed against the stopper (cup in upright position) and the cup support locked
through the handle, add water and a little neutral detergent inside the cup, put the lid on and turn on
the appliance for a few seconds. Turn off the appliance, remove the liquid as instructed in item 4.3.
Repeat the operation, but only adding water for rinsing.
The removable part (only the lid) must be removed from the appliance and washed with
running water and neutral soap. Clean the corners thoroughly, eliminating food residue.
The remainder of the equipment should be cleaned as many times as possible to prevent food
residue from drying out and sticking to parts.
Never use abrasive products or sponges for cleaning as they may scratch or ruin the part
surface. Do not spill water on the appliance for cleaning, otherwise, turning it on may cause electric
shock or even burn the appliance.
ATTENTION!
Take care when cleaning the glass, as the blades are exposed and are extremely sharp.
Handle with care, otherwise it could cause accidents. The same attention is paid to any
other sharp component of the appliance.
IMPORTANT
The manufacturer shall not be liable for any direct or indirect damages caused by non-
compliance with these standards and other instructions presented in this manual.
ATTENTION!
It is extremely important that the products used in cleaning ensure maximum cleanliness
and are not toxic.