17
First start-up. Run the stove for 10-15minutes to remove the "new
object smell" due to residual machining oils: during this operation, it is
good to aerate the environment.
Use the stove as follows:
1) Insert the plug into the socket.
2) Press the 0-500W switch to turn on one resistance (500W) and the
second 0-500W switch to turn on the second resistance (500 + 500 =
1000W).
3) Press the left-right automatic oscillating switch “
”.
If the switch key is in the lower position (on), the resistance and / or
oscillation are on, but these are deactivated if the key is in the raised
position (off).
4) To turn off the appliance, press the switches again to "off" and
remove the plug from the socket.
For long periods of inactivity, remove the plug from the socket.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch off, unplug and
wait for before it has completely cooled down.
Protect the parabola from dust to keep save its reflecting
characteristic.
To clean the body use a soft damp cloth; do not use abrasive
products.
The protection grill and the smocking net are very delicate; to
clean them only use your vacuum cleaner, paying attention not
to damage them.
When the stove is not in use it is necessary to cover and put it
in a dry place. We advise to use the original packing to preserve
it from dust and humidity.
The candle (230V 500W) must be substituted with a special
tool: please contact a competent qualified electrician.
If you decide not to use the appliance any more, we
recommend making it inoperative by cutting the power cord
(after making sure you have disconnected the plug from the
socket) and make dangerous parts harmless if children are
allowed to play with them.
