8
1.
Check that the smart plug is connected to the power and then start the
application and select "add device" or the "+" button in the upper right
corner.
2.
Press the power button of the smart plug for at least 5 seconds until the
indicator light flashes quickly.
3.
Confirm the status of the light on the application (the application will ask for
the status)
4.
Select the WiFi network and ener the correct password
5.
Wait for the automatic configuration
AP mode
1.
Use AP mode in case of failed connection in simple mode
2.
Long press the power button on the smart plug until the indicator light
flashes slowly.
3.
Confirm the status of the light on the application (the application will ask for
the status)
4.
Select the WiFi network and ener the correct password
5.
Select "connect now", choose the hotspot called "Smartlife xxx" and then
return to the application.
6.
Wait for the configuration.
If the installation has been carried out correctly, it is possible to act directly on the
power on status of the plug, set the timer and create usage scenarios
Mode: Voice control with Amazon Alexa or Google Home, supports iFTTT
Frequently asked questions
•
Does the smart plug work with any device?
The smart plug works with any device equipped with a shuko plug that falls within the
operating parameters or up to a maximum load of 2200 W and 10 Ampere.
•
Is the smart plug compatible with any network?
Ensure that the Wi-Fi network operates at 2.4GHz (frequency of common routers sold
in Italy) and that the router is for home use (i.e. it has no access restrictions other than
password).
•
Can I use several smart plugs?
Yes! It is possible to operate several smart plugs with the only limit being the
maximum capacity of the router to manage devices (this can vary from 5 to 150
devices). It is also possible to create groups to activate multiple smart plugs at the
same time.
•
What is the best position for the smart plug?
Within the range of the WiFi network in a position where the signal is powerful
enough to allow internet browsing.
•
How can I reset the smart plug?
You can reset the smart plug to the default settings by pressing the power button for
5 seconds and restarting the installation mode.
•
The smart plug loses the connection during use.
