ASSEMBLY INSTRUCTIONS
Position SIDE HANDLE (C) over pre-installed nuts
on side of TOP CHEST (A). Insert HANDLE BOLTS
(D) through holes on SIDE HANDLE (C). Use a
10mm socket wrench to fully tighten HANDLE
BOLTS (D) to TOP CHEST (A).
Repeat to install all remaining SIDE HANDLES (C).
Be sure to assemble SIDE HANDLES (C) on both
TOP CHEST (A) and BOTTOM CHEST (B) to make it
easier to move your Tool Chest.
A
C
D
© 2020 TRINITY - 800.985.5506
2
STEP 1
STEP 2
10mm
A (1)
C (4)
D (24)
Location of parts:
1) 2 KEYS (K) are hooked to key leash mounted
inside TOP LEFT drawer of TOP CHEST (A)
2) 2 KEYS (K) are hooked to key leash mounted
inside TOP drawer of BOTTOM CHEST (B).
3) 2 SIDE HANDLES (C) / 12 HANDLE BOLTS (D)
and 7 LINERS (J) for TOP CHEST (A) are inside
TOP lid.
4) 2 SIDE HANDLES (C) / 12 HANDLE BOLTS (D) /
4 CASTERS (E/F) / 16 CASTER BOLTS (G) / 2
REAR BRACES (H) / 8 BRACE SCREWS (I) and 5
LINERS (J) for BOTTOM CHEST (B) are inside
BOTTOM drawer.
1
2
4
3
B (1)