14
4. After selecting the last number redial menu,
you will hear a voice prompt,
“Last number
redial”
. Then, to redial the last phone call
number, tap the Center Button.
5. To call one of the speed dials, tap the (+)
Button or the (-) Button to navigate between
the menus until you hear a voice prompt,
“Speed dial (#)”
. Then, tap the Center
Button.
6. If you want to exit the speed dial
immediately, tap the (+) Button or the
(-) Button until you hear voice prompt,
“Cancel”
, and tap the Center Button. If you
do not press any button within 15 seconds,
the headset will exit the voice speed dial
menu and go back to stand-by mode.
Note:
1. Make sure that you connect the mobile
phone and the headset to use the speed
dial function.
2. You need to assign speed dial numbers
before using the speed dial (please refer to
section 8.5, “Assigning Speed Dial”).
3.3 GPS Navigation
If you pair a Bluetooth GPS to the headset as
described in section
2.2, “Multipoint Pairing
- Second Mobile Phone, GPS, and SR10”, you
can listen to GPS instructions wirelessly. Tap
the (+) Button or the (-) Button to adjust
volume. The GPS voice instruction interrupts
intercom conversation but it is automatically
reestablished after the GPS voice instruction
ends.
