Bilt DWO-3, User Manual

Page: 4 / 8

(1) Place the mobile phone and the Bluetooth helmet headset together within 1 meter.
(2) Make sure the Bluetooth helmet headset is powered off.
(3) Press and hold the
Button 1
of the Bluetooth helmet headset about 8 seconds until
heard a “dudu” tone played and the Blue and Red LED indicator flashes alternately,
and then release the button.
(4) Initiate Bluetooth function of the mobile phone and search the Bluetooth helmet
headset according to mobile phone user manual.
(5) Choose the Bluetooth device with the name “DWO-3”, then press ok button
to pair with it, enter pairing password <0000>, then the indicator turns into
regular Blue light flash, after that you will hear a “di” tone to indicate success
pairing. Then you can transmit voice frequency through the Bluetooth helmet headset
and use the button of that to control music playing of the mobile phone.
Note:
1. Some mobile phones don't need to input pairing password, because it can automatically complete the pairing
process.
2. If the phone and the Bluetooth helmet headset has been paired ,and the phone is on the state of connection,
after that every time turning on the headset ,it will automatically connect the mobile phone. If they are not
connected and the Bluetooth headset is idle state (blue LED short flashing every 3 seconds), a short press the
button 2, the headset will initiate a connection to the headset.
1. PAIRING WITH MOBILE PHONE
2. AUTOMATICALLY ANSWER INCOMING CALL
The Bluetooth helmet headset has the automatically answer function, after 2
incoming call ring tones played (about 10 seconds), and if there is not any operations
on the headset, the Blutooth helmet headset will answer the phone call automatically.
3. ANSWERING INCOMING CALLS
Press button 2 to answer when there is an incoming call or you can answer it with your
mobile phone normally.
4. REJECTING INCOMING CALLS
Double press
button 2
to reject an incoming call.
5. Hand Up
In call active state, a short press
button 2
can hang up the call.
6. LAST NUMBER REDIAL
(1) Left twist twice button 2 can redial last called out number when connected with
mobile phone.
(2) When playing music through bluetooth, if you want to redial last called out
number , first you must stop playing music and then left twist twice
button 2 .
7. Voice Dial
While the Bluetooth helmet intercom headset is connected with the mobile phone,
right twist twice
button 2 , then the mobile will prompt you to speak out your
desired name. When playing music through bluetooth, if you want to do that, first
you must stop playing music and then right twist twice
button 2 to come to voice dial.
8. VOLUME CONTROL
In phone or intercom call active and music-playing state, left twist and hold
button 2
can go to turn down the volume, right twist and hold
button 2
can go to turn up the volume, when reaching the maximum or minimum volume,
a "DiDong" tong will be played.
INSTALLATION OPERATION OPERATION
POWER ON & OFF
ENTER PAIRING MODE
MOBILE PHONE OPERATION
In power off state, press and hold Button 1 for about 8 seconds until a “didi”
tone played and the Blue and Red blue LED indicators flash alternately,
the headsets are on pairing mode (the Bluetooth headset can be searched
and paired only when it is on pairing mode).
1 In power off state, press and hold Button 1 for about 3 seconds until
a short “di” tone played and the Blue LED indicator flashes, the headset
is powered on.
2
In power on state, press and hold
Button 1
for about 8 seconds until
a short “di” tone played and Blue LED indicator shut off, the headset
is powered off.
1.
Pairing Intercom Headsets
1.1 Please press and hold
Button 1
until Red/Blue lights flashes alternately to
enter Pairing Model.
1.2 Short press
Button 1
of either headset, it will search the other one which in
pairing state, and then try to pair with it.
Note: Please do not press both Button 1 while starting the search operation !
1.3 Within a few seconds, both headsets will turn off the red light, and then
flashing slowly in blue. Pairing is finished.
2. After pairing successfully, just short press either of Button 1 , then the intercom
function will be activated.
3. Pairing is a one time process. Once the headsets are paired during this setup
procedure, they will remain paired and automatically recognize each other whenever
they are within available range.
4.
Either of headset users wants to end the intercom talking function, just short press
either of
Button 1
, and then the intercom function will be terminated.
5.
Mobile phone has highest priority. Mobile phone call can interrupt the intercom
call. The intercom will be restored automatically after phone call ended.
Note: the mobile phone has to support Bluetooth Hands free protocol to realize rejecting, last number redialing
and voice dial functions. For voice dial function, some mobile phones need user to manually set it in the mobile phone.
3 4
1 Headset control box mounting plate
The headset mount plate must be mounted onto
the helmet first. Once mounted, the headset unit
can be attached or detached from the sliding
plate at any time you want. The unit is designed
to be mounted on the left side of the helmet.
Note: it is better to remove it from the mounting plate
when not in use.
2 Mounting the microphone and speakers
- Ensure your helmet has enough room to mount the speakers (ie; cutout).
- Certain models of BiLT™ helmets are equiped with the specific cut-outs for this
model, DWO-3. At time of printing (Jan 2012) BiLT™ compatible model include;
Dominator, Tour Tech, Tour Tech TSS, GP3&CFK-1. For fitment to any other
motorcycle helmet please consult your local dealer for expert advice.
- Fit the velcro tabs into the cut-out on the above BiLT™ helmet, or where
applicable on other helmets then attach the speaker to the velcro tab (note: short
speaker cord for left, long speaker cord for right).
- Ensure the microphone is positioned in close proximatior to the mouth. On
above BiLT™ helmets the microphone can be routed behind the removable
cheek pads.
Always prioritise your riding, not mobile phone calls. During a mobile phone conversaton,
or while using the intercom, decelerateand concentrate on your riding. In bad weather
and/or heavy traffic we recommend pulling over and stopping before answering.
Feed cords under the helmet
liner if possible and as
close to the bottom of
the helmet
Right speaker
Microphone
Cable & Jack
Left speaker
INTERCOM OPERATION
Bluetooth Helmet Headset Bluetooth Helmet Headset
FCC
ID
: A
JZ
D
W
O
-3
MO
DE
L:
D
W
O
-3
VOL
-
VOL
+