![Billy Goat SC120H Operating And Safety Instructions Manual Download Page 24](http://html1.mh-extra.com/html/billy-goat/sc120h/sc120h_operating-and-safety-instructions-manual_2751696024.webp)
370310
F112003A
24
F
IG
. 10
15. M
AINTENANCE AND STORAGE
!
All operations on the machine must be carried out exclusively by authorized
personnel.
!
Always switch off the engine when checking, adjusting or servicing the ma-
chine.
!
Allow the machine to cool down before inspection.
!
The cover ( Fig. 1 ref. F) must always be correctly installed and intact. If it be-
comes damaged, have it repaired before the machine is used again.
!
Make sure that all the guards of rotating and moving parts are in place.
!
For greater safety, when replacing the blade replace all the fixing screws and
nuts at the same time, as described in section 14, point D.
!
Inspect the fuel lines. These should be replaced if damaged or after a maxi-
mum of three years, along with the fixing bands. Old lines may leak fuel.
!
Check and regularly adjust the forward clutch control, blade clutch control, and
accelerator.
!
Cover the machine with a sheet after the engine and silencer have cooled
down.
!
It is strictly forbidden to place/leave unattended on the sod cutter any potentially
dangerous objects which may put the safety of persons or the machine at risk.
!
Keep the machine in a good, clean state; do not leave it outside exposed to in-
clement weather conditions.
!
After use store the machine in a place where children have no access. Always
allow the machine to cool down before putting it away.
Summary of Contents for SC120H
