background image

 

 

 

Part No 831500 

 

Form No F052912A 

 
 

QVSP Operator’s Manual

 

PACKING CHECKLIST 

 

 

Your Billy Goat is shipped from the factory in one carton, completely assembled except for the nozzle.

 

 

  

PUT OIL IN ENGINE BEFORE STARTING 

 
 
 
 

 

 

 

 
 
 
 
 
 
 

 

 
 
     

    

 

 

   

 

 

 

 

 

 

 

 

 

 

    

 

 

 

 

    

 

 

 

 

 

 

 

 

 

             

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 

 

ASSEMBLY 
 

 

READ 

all safety instructions before assembling unit. 

TAKE CAUTION

 

when removing the unit from the box

 

1.  Remove the unit from the box. Be careful as cables could snag. 
2.  Attach the front nozzle (item 7) to the housing and secure it with the lock nuts (item 45) and washers (item 49) located in the parts 
bag. 

Boxing Parts Checklist 

 Debris Bag P/N-831225 
 Dust Sock P/N-831268 

 

 Front Nozzle P/N-831606 

 

 Literature Assy 

     P/N-831019  
     

 Honda 9 HP  
 Honda 5.5 HP 

  

 
 

 

PARTS BAG & 
LITERATURE ASSY  

 

Warranty card P/N- 

400972, Operator’s Manual P/N

-831500, Declaration of Conformity P/N-831503. 

General Safety and Warnings Manual P/N-100294

 

Summary of Contents for QV550HSP














Reviews: