MVSP Owner’s Manual
Part No 840245
7
840245_B_
LO
OPERATION
This vacuum is designed for picking up trash, organic material and other similar debris. It should not be used for other purposes
than what is intended.
OPERATOR
CONTROLS
The operator’s position is at the rear of the machine between the handlebars. The operator should STAND in a position to allow
both handlebars to be grasped firmly, which allows sufficient leverage to steer the machine. Operator’s controls are shown below.
Operator Control Locations
1 Drive Clutch Lever
2 Bag Latch
3 Pull Starter
4 Throttle Control
5 Drive Shifter Control 6 Nozzle Door Adjuster
STARTING
CHECK
engine oil level before operating machine.
1
2
3
4
6
5
Secure unit at the handle with left
hand during start.
Pull rope starter with right
hand.
On Electric
models only.
DO NOT START
equipment without the debris bag in place.
1. Place equipment on a level, firm surface that is free of rocks or other
debris.
2. Place throttle in START position.
3. Secure the unit with left hand at the handle then pull starter rope with right
hand to start engine. NOTE: Pull starter cord slowly until resistance is felt.
Then pull cord rapidly to avoid kickback.
4. Move throttle control back to FAST position and allow engine to reach
correct operating speed.
5.
For Electric models
: Set the throttle to the fast position, then pull up and
push forward on the start switch. Choke if needed.
SHUT
DOWN
1. Release the drive clutch lever to disengage the drive.
2. Pull the throttle control all the way back to the STOP position.
Fig
. 8
Fig
. 9
NOT FOR REPRODUCTION
