![Billy Goat MV VACUUM PUSH EU MV601EU Owner'S Manual Download Page 13](http://html.mh-extra.com/html/billy-goat/mv-vacuum-push-eu-mv601eu/mv-vacuum-push-eu-mv601eu_owners-manual_2751536013.webp)
MV PUSH EU Owner’s Manual
Part No
840506
13
840506_
A
_HI
TROUBLESHOOTING
Problem
Possible Cause
Solution
Will not vacuum or has poor
vacuum performance.
Dirty or full debris bag or filter.
Clean debris bag and filter. Shake bag clean
or wash.
Nozzle height set too high or too low.
Adjust nozzle height (see page 10).
Hose kit cap missing.
Check for hose kit cap.
Clogged nozzle or exhaust.
Unclog nozzle or exhaust (see page 10)
Excessive quantity of debris.
Allow air to feed with debris.
Abnormal vibration.
Loose or out of balance impeller.
Check impeller and replace if required.
Loose engine.
Check engine.
Engine will not start.
Throttle in off position.
Check throttle control (see page 9).
Engine not in full choke position.
Check throttle, choke position (see page 9).
Out of gasoline or bad, old gasoline.
Check gasoline.
Spark Plug wire disconnected.
Connect spark plug wire.
Gas valve off.
Turn on gas valve.
Dirty air cleaner.
Clean or replace air cleaner. Contact a
qualified service person.
Safety Interlock disengaged on bag
plate.
Latch the bag properly or check the bag rod
to see if it's bent.
Engine is locked, will not pull
over.
Impeller plugged or clogged.
Remove debris (see page 10).
Engine problem.
Contact an engine servicing dealer for
engine problems.
NOT
FOR
REPRODUCTION