Billy Goat KV VACUUM KV600, Owner'S Manual

Page: 6 / 11

KV PUSH Owner’s Manual
Part No 891203 Form No F102315A
6
ASSEMBLY INSTRUCTIONS
NOTE : Items in ( ) can be referenced in the Parts Illustration and Parts List on pages 10-11.
1. ASSEMBLE Lift upper handle (item 11), remove items 34, 32, and 33 from the parts bag. Attach and secure upper
handle as shown using same hardware. (See Fig . 1)
2. ATTACH the throttle lever (item 23) to the handle, either to the right side or left depending on which model of engine you
have (see image below). Attach the lever with the hardware (items 36, 37, and 39) found in the parts bag. Once attached
use the Ty-wrap to secure the cable to the handle.
3. UNFOLD the debris bag (item 21) and fasten bag neck to bag quick disconnect (item 12). Attach firmly to housing
exhaust (item 1) see Fig . 2 and 3.
4. ATTACH bag hanger strap to bag supports (item 13), preassembled to upper handle.
5 . CONNECT spark plug wire.
Fig . 3
Insert the quick disconnect from the inside of the bag, tilt the handle so it can be fed through first. Then slide the connecting
end through and tighten the strap.
Fig . 2
Fig . 1