background image

Part 

No. 

520141 

          Form 

No. 

F061604A

Page 5 of 20

CONTROLS

Throttle Control

13

Owner's 

Manual 

Check

Owner's 

Manual 

520141

Warranty 

Card  

Check

Warranty 

Card  

400972

Literature Checklist

12

LITERATURE ASSY

Electric Start Only

Pull up on the switch 
then   push forward to 
start the engine.

3 3 "   T R I P L E   B L A D E  

E L E C T R I C   S TA RT  M O D E L

P

a

rt

 No:

 5200048

3 3 "   T R I P L E   B L A D E  

3 3 "   T R I P L E   B L A D E  

 

M O W E R

Follow all instructions in Owner's Manual.
Go across slopes, not up and down.
Do not mow when children or others are around.
Look down and behind before and while moving
backwards.
Keep safety guards, shields, switches, and etc.
in place and working.

AVOID SERIOUS INJURY OR DEATH.

OBJECT THROWN BY BLADE
CAN CAUSE SERIOUS INJURY.

Inspect area and remove debris before
mowing.
Keep children and others away.
Wear eye protection.
Do not operate unless guard is in place.

WARNING

STOP

START

CHOKE

OFF

RUN

START (PULL UP)

R

N

1

3

4

5

TRANSPORT ONLY

LIFT THEN PULL

TO REVERSE

LIFT THEN PULL

TO REVERSE

2

Speed Control

5th gear (Transport-
ing Speed): LIft up on 
the lever then push 
to engage in the 5th 
gear.

Rev: LIft up on the 
lever then pull back 
for reverse.

  P/N 520137 

900407

Ty Wrap

Qty 4

ENGINE LABELS

14

Briggs & Stratton

Read and follow Operating
Instructions before running engine.

Gasoline is flammable. Allow engine
to cool at least 2 minutes before fueling.

Engines emit carbon monoxide,
DO NOT run in enclosed area.

520156

Roll Pin 1/4" x 1" 

long Qty 1

Summary of Contents for FM3300





















Reviews: