Billy Goat F800 Owner'S Manual Download Page 5

 

 

Part No 440187 

 

Form No F091907C 

 

5

FORCE BLOWER 8 Owner’s Manual

 

 

 

DO NOT 

run this equipment indoors or in any poorly ventilated area. Refueling outdoors is 

recommended. 

DO NOT 

refuel this equipment while the engine is running. Allow engine to cool for at least 

two minutes before refueling. 

DO NOT 

store gasoline near an open flame. 

DO NOT 

remove gas cap while engine is running. 

DO NOT 

start or operate engine if strong odor of gasoline is present. 

DO NOT 

start or operate engine if gasoline is spilled. Move equipment away from spill until 

gasoline has completely evaporated. 

DO NOT 

smoke while filling the fuel tank. 

DO NOT 

check for spark with spark plug or spark plug wire removed. Use an approved spark 

tester. 

DO NOT 

operate engine without a muffler. Inspect muffler periodically and replace if 

necessary. If equipped with muffler deflector, inspect deflector periodically and replace if 
necessary. 

DO NOT 

operate engine with grass, leaves or other combustible material near the muffler. 

DO NOT 

touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may 

cause severe burns. 

DO NOT 

leave equipment unattended while in operation. 

DO NOT 

park

 

equipment on a steep grade or slope. 

DO NOT 

operate equipment with bystanders in or near the work area. 

DO NOT 

allow children to operate this equipment. 

DO NOT 

operate equipment with guards removed. 

DO NOT 

operate

 

equipment near hot or burning debris or any toxic or explosive materials. 

DO NOT 

operate

 

equipment on slopes greater than specified in Specifications section of this 

manual.

 

ALWAYS 

remove spark plug wire when servicing equipment to prevent accidental starting. 

ALWAYS 

check fuel lines and fittings frequently for cracks or leaks. Replace if necessary. 

ALWAYS 

keep hands and feet away from moving or rotating parts. 

ALWAYS 

store fuel in approved safety containers. 

WARNING: Important 

Do not run this machine without director cone attached or with improper air director cone. 

 

DO NOT

 run this machine with a cracked or damaged impeller under any circumstances. 

 

 
 
 
 

Summary of Contents for F800
















Reviews: