CR POWER RAKE Owner’s Manual
Part No 350245
Form No F030515D
4
INTENDED USE
INTENDED USE
This machine is designed for removing thatch from your lawn, renovation of existing lawns, and to assist in overseeding
operations. The machine should not be used for any other purpose than that stated above.
DO NOT
operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for
damaged or worn reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See troubleshooting section on
page 9).
INSTRUCTION LABELS
The labels shown below were installed on your BILLY GOAT
®
CR Power Rake. If any labels are damaged or missing, replace
them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for
convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and
Item numbers shown.
LABEL DANGER KEEP HANDS LABEL CLUTCH ITEM #49
DANGER FLYING DEBRIS
AND FEET AWAY
P/N 830503 ITEM # 48 P/N 810736
ITEM #51 P/N 400424
LABEL CAUTION GUARD
LABEL EXPLOSIVE FUEL LABEL INSTRUCTION HEIGHT ADJ.
ITEM #52 P/N 900327 ITEM # 50 P/N 400268
ITEM #35 P/N 350224
ENGINE LABELS/CONTROLS
Controls CR550H
Fuel Valve
Throttle
Choke
HONDA
