Billy Goat AET60 Owner'S Manual Download Page 3

Part No. 100384

3

Specifications

Total Unit Weight

443lb (201kg)

Width

37”-48”-60”

Maximum Operating Slope

15 °

Intended Use

Replacement Parts

Table 1: Specifications

Your Billy Goat

®

 Aerator

This machine is designed for aerating established lawns and large grass covered areas. 

The machine should not be used for any other purpose than that stated above.

DO NOT OPERATE IF EXCESSIVE VIBRATION OCCURS! 

If excessive vibration occurs, stop use of the unit immediately and check for damaged 

or worn reel, loose hardware, or lodged debris. 

Handling and Transporting 

Always use four or more people to lift this machine. Lift holding on either side of the 

machine, using the handles and the frame. Secure in place during transportation. See 

specifications for unit weight.

For safety use gloves when lifting.

P/N 360100

Replacement tip for 

aerating tines. 

TINE REPLACEMENT

Safety

PROPOSITION 65 STATEMENT 

WARNING 

This product can expose you to chemicals including gasoline engine exhaust, which is known to the State of 

California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth de

-

fects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

NOT FOR REPRODUCTION

100384_A_

LO

Summary of Contents for AET60











Reviews: