background image

 

 

Part No 361149

 

 

        

Form No F062810A 

 

8

TOW AE Owner’s Manual 

 

 

 

 

 

 

 

 

 

 
 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 
 
 
 

HANDLING & TRANSPORTING: 

 

CAUTION:

 This unit is heavy do not lift.   

REMOVE:

 Drain the water from the weight jugs (see accessories pg. 1) or remove weights before loading and 

unloading the unit. 
NOTE: The water tank accessory is also heavy (up to 40 lbs.) when it is full of water. The tank should be drained 
and secured in place during transport. 

 
USING RAMPS:

 Use ramps that are of adequate strength for a unit of this weight. When loading the aerator using 

ramps be sure the ramp is not too steep and that the surface of the ramp provides good traction. 
 

ENGAGE TINES: 

With the aerator in the work area, raise both wheels to their upward locked position, this will 

lower the tines into the dirt. 

 
TRANSPORT: 

Be sure to lift the tines out of the ground before transporting away from the work area. 

 
AERATING TIPS 
 
WATER: 

For the best performance and maximum tine penetration, the lawn should be thoroughly watered the day 

before aeration. 

 
SLOPES: 

Do not aerate on steep slopes. Use extreme caution when operating on any sloped surface. For lesser 

sloped areas operate the unit, traversing up and down at a 45 degree angle to the slope rather than straight 
across. 
 

TINE PENETRATION: 

Maximum tine penetration is achieved by the amount of weight that is being used. 

 
TURNING: 

Avoid sharp turns or high speed turns as this may result in damage to the machine. 

PARKING 

NEVER PARK THIS UNIT ON A SLOPE OF ANY KIND. Always keep tines in the up position when parking the unit. 

 

Summary of Contents for AET48













Reviews: