background image

POWER RAKE SEEDER BOX KIT-350395 AND 350397

 

 

Part No 350398 

                                - 3 -                                                          Form No F102207B 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

ADJUSTING SEED RATE 

LAWN PREPARATION 

- MOW LAWN TO LOWEST SETTING ON 
YOUR MOWER. 
- DO NOT WATER PRIOR TO SEEDING. 
- POWER RAKE TO DETHATCH LAWN 
AND REMOVE THATCH.

 

- FERTILIZE LAWN WITH BROADCAST 
SPREADER. 

LAWN PREPARATION 

- FOR BEST RESULTS OVERSEED IN 
TWO PASSES OF ONE-HALF 
APPLICATION RATE EACH, AT RIGHT 
ANGLES OR IN A CRISS-CROSS 
PATTERN.

 

- WATER HEAVILY IMMEDIATELY THEN 
LIGHTLY FOR 10 - 14 DAYS, KEEPING 
SOIL MOIST. 
- AFTER GERMINATION, WATER LESS 
OFTEN TO PROMOTE ROOT GROWTH.

Summary of Contents for 350395

Page 1: ...l and slowly feeding the belt onto the seeder box pulley 2 Rotate wheel to insure belt turns freely 3 If the belt seems to be too tight bump seeder box upward to loosen belt 4 Check the pulley alignment then tighten 4 capscrews inside seeder box 5 Repeat step 3 to 5 if necessary 6 Remove blocks from under machine push machine to test mechanism Seeder meter control box installation 1 Attach the See...

Page 2: ... 350271 PLATE DOOR DROP SEEDER 1 6 350272 PLATE DOOR DROP SEEDER END 1 7 350387 PLATE DOOR DROP SEEDER END ARM 1 9 350370 PULLEY 3V GROOVE 0 625 BORE 1 10 8172009 WASHER 10 3 8 SAE 1 11 900321 BEARING CLIP 1 375 OD 4 12 890108 KNOB WING 5 16 18 1 13 400217 SPRING TENSION 2 14 8024040 BOLT CARRIAGE 5 16 18 X 1 1 15 8024021 BOLT CARRIAGE 1 4 20 X 3 4 1 16 8123087 SCREW SELF TAP 10 24 X 3 8 HMS ZP 4 ...

Page 3: ...R PRIOR TO SEEDING POWER RAKE TO DETHATCH LAWN AND REMOVE THATCH FERTILIZE LAWN WITH BROADCAST SPREADER LAWN PREPARATION FOR BEST RESULTS OVERSEED IN TWO PASSES OF ONE HALF APPLICATION RATE EACH AT RIGHT ANGLES OR IN A CRISS CROSS PATTERN WATER HEAVILY IMMEDIATELY THEN LIGHTLY FOR 10 14 DAYS KEEPING SOIL MOIST AFTER GERMINATION WATER LESS OFTEN TO PROMOTE ROOT GROWTH ...

Page 4: ...an be reused if they are not damaged The lock washer twisted tooth p n 400502 57 screwcap reel pulley p n 8041050 71 and key 3 16 x 1 p n 9201078 42 must be replaced Note pulley key and spacer must be inserted only onto the side of the reel that will be driven by the engine The angled edge of the blades should be facing the direction in fig 1 to dig into the ground otherwise the machine will not p...

Reviews: