1
The device is a powerful, high-performance Fast Ethernet
switch, with all ports capable of 10 or 100Mbps
auto-negotiation operation (NWay), which means the switch
could automatically negotiate with the connected partners on
the network speed and duplex mode. It is ideal for
micro-segmenting large networks into smaller, connected
subnets for improved performance, enabling the bandwidth
demanding multimedia and imaging applications. Compared
to the shared 10Mbps or 100Mbps networks, the switch
delivers a dedicated 10/100Mbps connection to every
attached client with no bandwidth congestion issue. This
switch also supports auto MDI / MDI-X function. Each port
could be used to connect to another switch or hub with no
crossover RJ-45 cable.
Store-and-forward switching mode promises the low latency
plus eliminates all the network errors, including runt and CRC
error packets. To work under full-duplex mode, transmission
and reception of the frames can occur simultaneously without
causing collisions as well as double the network bandwidth.
The switch is plug-n-play without any software to configure
and also fully compliant with all kinds of network protocols.
Moreover, the rich diagnostic LEDs on the front-panel can
provide the operating status of individual port and whole
system.
Before you start to install the switch, check the following
contents in this package
：
z
One NWay switch
z
One external power adapter
z
User’s manual
