75
Security
Wireless security prevents unauthorized access or damage to computers using wireless network.
Note
：
The WPS feature will also be unavailable when the security setting is not WPA2 PSK or OPEN. So,
if you manually set the wireless security setting, you should give notice to it, but you can find prompt
indicating configuration.
Manual Setup AP
Select SSID:
select the SSID you want these settings apply to.
Network Authentication
L
Open
WEP Encryption:
Select to enable or disable WEP Encryption. Here select Enable.
Encryption Strength:
Select the strength, 128-bit or 64-bit.
Current Network Key:
Select the one to be the current network key. Please refer to key 1- 4 below.
Network Key (1- 4):
Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys.
Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys.
Summary of Contents for BiPAC 8700NEXL R2
