background image

Quick Start Guide 

 

     

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

7300GX v101EN 

       

Extreme caution should be exercised when using the car 
charger adapter! 

 

  Only use power chargers that have been approved by Billion to be used with the 

device. 

  The supplied power charger adapter can only be used with a 12V car lighter 

socket. Please make sure you do not use a 24V car lighter socket. 

  If your car uses a 24V car lighter socket, please make sure you use a voltage 

regulator to change the voltage from 24V to 12V. 

  The car charger adapter provides you with power supply to the 7300GX whilst in 

the car. 

  You should start the car's engine before connecting the power charger adapter or

switching on the device. The concern is that when you turn on the car's engine 
the temporary spike in electricity to the power charger adapter might cause 
damage to the device. 

  Please be aware that if using the power charger for lengthy periods when the 

engine of the car is turned off, the battery of the car may be slowly drained. This 
may cause the car not to start. 

  The power charger adapter should not be used in conditions where it is exposed 

to high humidity and extreme temperatures (hot or cold) for long periods. 

  Try to avoid a sudden change in temperature around the device as this might 

cause moisture to be trapped within the case of 7300GX causing damage to the 
device. If this ever occurs, please wait until the device is fully dried before 
powering it on. 

  Do not place the power charger adapter or the device near any flammable liquid, 

gas or explosives. 

  When setting up the device in the car, please consider the placement position of 

the device and make sure it is securely fastened down. (i.e. don't place it in areas
where it may be in the way of the car's safety airbag system, or in a position 
where it may be dislodged and become dangerous as an airborne projectile 
during an impact or accident.) 

  Please avoid long exposure to high and low temperature as this may cause 

permanent damage to the device. (i.e. don’t leave the device in the car on a hot 
summer's day or a cold winter's night.) 

  For your safety, we strongly recommend you not to operate the device whilst 

driving.

 

Summary of Contents for BiPAC 7300GX









Reviews: