Quick Start Guide
2
Hardware Overview
The Front LEDs
The Rear Ports
*
Note:
1. For WPS configuration, please refer to the WPS section of user manual.
2. USB feature is not supported by 5400N
R2
, please don’t try to connect to this port in case of
any damage.
Connect the
supplied power
adapter to this jack.
Connect the supplied
RJ-11 cable to this port
when connecting to the
ADSL/ telephone network.
Push WPS button to
trigger Wi-Fi Protected
Setup function. *
1
Lit green when
power is on.
Lit green when connected
to an Ethernet device.
Lit green when the wireless
connection is established.
Flashes when the device is
sending/ receiving data.
Lit green when WAN port gets IP
address successfully. Unlit when
the device is in bridge mode or
WAN connection is absent.
Lit green when successfully
connected to an ADSL DSLAM
(“line sync”); flash green when
the device is establishing the
active DSL link.
Connect your computer to a
LAN port with the included
Ethernet cable.
Flash green when
WPS configuration is
in progress.
Connect with
wireless antenna
Press 1~2 seconds
to switch on/ off
wireless.
Power ON/ OFF
switch.
For the USB
connection*
2
