V. 040909
Copyright © Billion Electric Co., Ltd. All rights reserved.
*
Note:
1. The router may require firmware modification for certain ADSL2/2+/ Annex M DSLAMs.
2. Specifications in this datasheet are subject to change without prior notice.
ADSL Compliance
• Compliant with ADSL Standard
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.lite (ITU G.992.2)
- G.hs (ITU G.994.1)
- ADSL over ISDN/U-R2
• Compliant with ADSL2 Standard
- G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M)
(Available for BiPAC 5200G
R4
A model only)
• Compliant with ADSL2+ Standard
- G.dmt.bis plus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M)
(Available for BiPAC 5200G
R4
A model only)
Network Protocols and Features
• NAT, static routing and RIP-1/2
• NAT supports PAT and multimedia applications
• Multi-to-multi NAT
• Transparent Bridging
• Dynamic Domain Name System (DDNS)
• SNTP
• DNS relay
Firewall & Virtual Private
Network (VPN)
• Built-in NAT Firewall
• Prevents DoS attacks including Land Attack,
Ping of Death,etc.
• Anti probe function
• Packet filtering
• Password protection for system management
• VPN pass-through
Wireless 802.11g
• Compliant with IEEE 802.11g and
802.11b standards
• 2.4 GHz - 2.484 GHz frequency range
• Up to 54 Mbps wireless operation rate
• 64/128-bit WEP supported for encryption
• Wireless Security with WPA-PSK/
WPA2-PSK support
ATM and PPP Protocols
• ATM Adaptation Layer Type 5 (AAL5)
• Multiple Protocol over AAL5
(RFC 2684, formerly RFC 1483)
• Bridged or routed Ethernet encapsulation
• VC and LLC based multiplexing
• PPP over Ethernet (PPPoE)
• PPP over ATM (RFC 2364)
• OAM F4/F5
• ATM QoS: UBR, CBR, VBR-rt, VBR-nrt
Management
• Web-based configuration
• Firmware upgrades and configuration
data upload and download via HTTP/FTP
• SNMP v2 MIB supported
• Supports DHCP server/client/relay
Operating Environment
•
Operating temperature: 0 - 40ºC
•
Storage temperature: -20 - 70ºC
•
Humidity: 20 - 95% non-condensing
Hardware Specifications
Physical Interface
• WLAN: fixed Antenna
• LINE: ADSL port
• LAN: 4-port 10/100M auto-crossover
(MDI/MDI-X) switch
• Factory default reset button
• Power jack
• Power switch
Physical Specifications
• Dimensions: 7.09" x 4.72" x 1.57”
(180mm x 120mm x 40mm)
Power Requirements
• Input: 12V AC, 1A
Models & Standards Supported
• BiPAC 5200G
R4
A: Supports Annex A and Annex M
• BiPAC 5200G
R4
U: Supports U-R2 and Annex B
• Annex A and Annex M: ADSL over POTS
• Annex B and Annex U-R2: ADSL over ISDN
Features & Specifications
Wireless
Security
Switching
HUB
Firewall
BiPAC 5200G
R4
Internet
ADSL2+
TEL: 08-8186-1800
FAX: 08-8186 0222
E-mail: [email protected]
