22
4G/LTE Status
This page contains 4G/LTE connection information.
Status:
The current status of the 4G/LTE connection.
Signal Strength:
The signal strength bar and dBm value indicates the current 4G/LTE signal strength.
The front panel 4G/LTE Signal Strength LED indicates the signal strength as well.
Signal Information:
Shows
important LTE signal parameters such as RSRP (Reference Signal
Receiving Power), RSRQ (Reference Signal Receiving Quality), SINR (Signal to Interference plus
Noise Ratio).
RSRP (Reference Signal Receiving Power): is the average power of all resource elements which
carry cell-specified reference signals over the entire bandwidth.
RSRQ (Reference Signal Receiving Quality): measures the signal strength and is calculated
based on both RSRP and RSSI.
SINR (Signal to Interference plus Noise Ratio): is also a measure of signal quality as well. It is
widely used by the operators as it provides a clear relationship between RF conditions and
throughput.
Note:
Some LTE modules do not provide this information.
Network Name:
The name of the LTE network the router is connecting to.
Cell ID:
The ID of base station that the device is connected to.
Card IMEI:
The unique identification number that is used to identify the 4G/LTE module.
Card IMSI:
The international mobile subscriber identity used to uniquely identify the user of a celluar
network
– a number provisioned in the SIM card..
Network Mode:
Show the using network mode.
Network Band:
Show the using network band.
Amount used:
Show the volumn used, the amount can be refered to
only Download
,
only Upload
and
Download and Upload
, please move to
Usage Allowance
to check.
