need, the lamp for the DMX channel control, 8-channel below the fixed interval allocated to the lighting
of the DMX512 address, Please refer to:
Light No. decimal system binary system DIP No.
1 1 100000000 #1 to“ON” the rest to“OFF”
2 9 100100000 #1
、
#4 to
“
ON
”
(9=8+1)
3 17 100010000 #1
、
#5 to
“
ON
”
(17=16+1)
. .
. .
N (N-1) * 8 +1
DMX MODE:
1.Setting mode: DMX mode is controlled by international standards DMX512, When setting
DMX mode, the light need to be distributed a DMX channels.
2.Control and connecting: Connecting with XLR-XLR line from output of controller to the input
of first light, and then connecting from output of first light to the input of second light. As the
same steps to the last light. Take follow picture for example:
3.Before using of DMX512 control, please turn power on the light.
Note: Please keep in mind that the signal output of final lamp should be connected to the circuit
plug, circuit plug has a 120 ohm resistance between 2 feet and 3 feet, the circuit plus can avoiding
signal reflecting phenomenon during DMX 512 transmission.