manualshive.com logo in svg

Bilancial D410, Use And Maintenance Manual, Page: 44 / 84

Share
Download
Bilancial D410 Use And Maintenance Manual Download Page 44

NOTE: the indication 

Tare C

 indicates that the tare displayed is a

"coded" tare to which a numerical code has been assigned (  par.
5.2.12 on page 1-47   ).

✔

If multiple tares were set during installation:

Tare T: acquired tare value + unit of measurement

Tare 1 PT: preset tare 1 value + unit of

measurement

Tare 2 PT: preset tare 2 value + unit of

measurement

Or

Tare C PT: preset tare value + unit of

measurement

Tare 1 PT: preset tare 1 value + unit of

measurement

Tare 2 PT: preset tare 2 value + unit of

measurement

Or

Tare PT: "non coded" tare value + unit of

measurement

Tare 1 PT: preset tare 1 value + unit of

measurement

Tare 2 PT: preset tare 2 value + unit of

measurement

The indications 

 and PT will be illuminated.

NOTE: 

Tare 1

 and 

Tare 2

 may also be recalled via numeric

code (  par. 5.2.13 on page 1-48   ).

✔

Extraction

This display mode is only possible if loading or unloading extraction
operating mode is selected (see  par. 5.4.3 on page 1-54   and  par.
5.4.4 on page 1-55   ).
The display shows the gross weight, the extracted weight and the
weighing symbols.

 D410 

1-44

Summary of Contents for D410





















































































Reviews:

No comments