Bilanciai VENUS, User Manual

Page: 21 / 184

3.1 Connection of the terminal to the electricity main
DANGER
Check that:
✔
the voltage and frequency of the electricity main
correspond to the indications on the warning plate affixed to
the rear of the terminal (see point 2 Figure 3.1 on page
1-19);
✔
the mains outlet socket to which the terminal is connected
is equipped with an earth;
✔
the warning and danger plates are affixed to the casing
enclosing the instrument;
✔
failing this, notify your maintenance personnel or contact
our Assistance Service directly.
Proceed in the following way to connect the terminal to the electricity
main in the correct way:
✔
insert the threepole connector of the power lead into the rear part of
the terminal;
✔
insert the plug of the power lead into the right power socket;
The terminal complies with the European Directive governing
electromagnetic compatibility, however it is good practice to provide a
separate power supply line for the terminal.
Venus
1-21