Bilanciai DD1050 Operation, Maintenance And Installation Manual Download Page 90

Page: 90 / 112

DD1050

field:

Alias scale (param_ScaleAlias).

> Mnemonic name to assign to the scale, e.g. Scale A or B, etc.
Default Value: []; Type: String, Length MAX: 20

9.20 CbMainWeight.ConfigInputTareSet.ConfigSchema.xml

Plugin: PluginCbMainWeight

Schema: ConfigSchema

Component Name:

Tare acquisition - (CbMainWeight.ConfigInputTareSet)

Category:

- (UseMode)

SubPath:

I/O Board::Inputs - (RESOURCE::CbMainWeight.param_SchedaIO_Input)

field:

Input Node (param_InputNode).

> Indicates the network node. The terminal used is indicated with localhost. Select node from

pop-up list.

Default Value: []; Type: String, Length MAX: 20

field:

Input number (param_InputNumber).

> Number/name to assign to the input. Inputs with the same number/name cannot coexist in

the same terminal.

Default Value: []; Type: String, Length MAX: 20

field:

Alias scale (param_ScaleAlias).

> Mnemonic name to assign to the scale, e.g. Scale A or B, etc.
Default Value: []; Type: String, Length MAX: 20

9.21 CbMainWeight.ConfigInputTareSetReset.ConfigSchema.xml

Plugin: PluginCbMainWeight

Schema: ConfigSchema

Component Name:

Tare Acquisition/Deletion - (CbMainWeight.ConfigInputTareSetReset)

Category:

- (UseMode)

SubPath:

I/O Board::Inputs - (RESOURCE::CbMainWeight.param_SchedaIO_Input)

field:

Input Node (param_InputNode).

> Indicates the network node. The terminal used is indicated with localhost. Select node from

pop-up list.

Default Value: []; Type: String, Length MAX: 20

field:

Input number (param_InputNumber).

> Number/name to assign to the input. Inputs with the same number/name cannot coexist in

the same terminal.

Default Value: []; Type: String, Length MAX: 20

field:

Alias scale (param_ScaleAlias).

> Mnemonic name to assign to the scale, e.g. Scale A or B, etc.
Default Value: []; Type: String, Length MAX: 20

Summary of Contents for DD1050

















































































































Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands

Bilanciai DD1050, Operation, Maintenance And Installation Manual

Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands