Bilanciai DD1050 Operation, Maintenance And Installation Manual Download Page 81

Page: 81 / 112

DD1050

field:

Exit layout\nSecondary printer (param_SecondaryLayoutOuput).

> Name of the file containing the description of the layout of the data on the printed ticket in

relation to the exit weight. The exit printout gives the entrance data. The number indicates

the maximum length of the file name in characters.

Default Value: [RcDInputOutput.xml]; Type: String, Length MAX: 30

field:

RcD archive layout (param_RcDArchiveLayout).

> Name of file containing the description of the data layout on the printed ticket. The number

indicates the maximum length of the file name in characters.

Default Value: [RcDArchive.xml]; Type: String, Length MAX: 30

9.10 CbDoubleWeight.ConfigRcP.ConfigSchema.xml

Plugin: PluginCbDoubleWeight

Schema: ConfigSchema

Component Name:

RPD - (CbDoubleWeight.ConfigRcP)

Category:

- (UseMode)

SubPath:

Functions::Double Weight - (RESOURCE::CbDoubleWeight.param_FunzDp)

field:

Operation Type (param_OperationType).

> Select operation type
Default Value: [val_RcP]
•

Disabled (val_Disabilitato)

•

RPD (val_RcP)

> Recall Preset Weights

•

RPDPlate (val_RcPTarga)

> Recall Preset Weights with Plate

field:

RPD Archive enabled (param_ArchivioRcP).

> Allows the RPD codes archive (Recall Preset Data) to be enabled. A first present weight, the

product, elient, plate and coefficient (if enabled) fields are associated with the RPD code. The

exit weight, date and time fields are added to the record after the second weight. Weight

totalizing per RPD code can be enaled.

Default Value: [val_conTotalizzazione]
•

Disabled (val_Disabilitato)

•

Enabled without totalizing (val_noTotalizzazione)

•

Enabled with Totalizing (val_conTotalizzazione)

field:

Copies with RPD (param_NumeroCopie).

Default Value: [0]; Type: Int

field:

Print date and time (param_StampaDataOra).

> Tick to print date and time on ticket
Default Value: [true]; Type: Bool
•

true

•

false

field:

Print Logo (param_StampaLogo).

> Tick to print logo on ticket
Default Value: [true]; Type: Bool
•

true

Summary of Contents for DD1050

















































































































Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands

Bilanciai DD1050, Operation, Maintenance And Installation Manual

Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands