Bilanciai DD1050 Operation, Maintenance And Installation Manual Download Page 77

Page: 77 / 112

DD1050

9.7 CbDoubleWeight.Config.ConfigSchema.xml

Plugin: PluginCbDoubleWeight

Schema: ConfigSchema

Component Name:

Double Weighing operation - (CbDoubleWeight.Config)

Category:

- (UseMode)

SubPath:

Operating modes - (RESOURCE::CbMainWeight.param_Funzionamenti)

field:

Plate Archive enabled (param_ArchivioTarga).

Default Value: [val_conTotalizzazione]
•

Disabled (val_Disabilitato)

•

Enabled without totalizing (val_noTotalizzazione)

•

Enabled with Totalizing (val_conTotalizzazione)

field:

plate Archive layout (param_PlateArchiveLayout).

> Name of file containing the description of the data layout on the printed ticket. The number

indicates the maximum length of the file name in characters.

Default Value: [PlateArchive.xml]; Type: String, Length MAX: 30

field:

Plate total layout (param_PlateTotalLayout).

> Name of file containing the description of the data layout on the printed ticket. The number

indicates the maximum length of the file name in characters.

Default Value: [PlateTotal.xml]; Type: String, Length MAX: 30

field:

Print tare (param_StampaTara).

Default Value: [val_Predeterminata]
•

Print always (val_Sempre)

•

Print if preset (val_Predeterminata)

•

Print if not zero (val_DiversaDaZero)

9.8 CbDoubleWeight.ConfigRcA.ConfigSchema.xml

Plugin: PluginCbDoubleWeight

Schema: ConfigSchema

Component Name:

AdR - (CbDoubleWeight.ConfigRcA)

Category:

- (UseMode)

SubPath:

Functions::Double Weight - (RESOURCE::CbDoubleWeight.param_FunzDp)

field:

AdR Archive enabled (param_ArchivioRcA).

> Allows the AdR codes archive (Anagraphical Data Recall) to be enabled. The AdR code is

associated with an alphanumerical description and the client, plate and coefficient (if enabled)

fields if enabled. After weighing, the entrance weight, date and time fields are added to the

record. Weight totalizing per AdR code can be enabled.

Default Value: [val_conTotalizzazione]
•

Disabled (val_Disabilitato)

•

Enabled without totalizing (val_noTotalizzazione)

•

Enabled with Totalizing (val_conTotalizzazione)

field:

Input Copies (param_NumeroCopieIngresso).

> Number of tickets printed after the entrance weight.
Default Value: [0]; Type: Int

Summary of Contents for DD1050

















































































































Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands

Bilanciai DD1050, Operation, Maintenance And Installation Manual

Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands