EQUIPMENT LOADING
8
Raise the Deck (trailer must be hitched to the vehicle)
1. Check the latch clamp. Tilt the latch clamp back
onto the handle.
2. Crank winch handle to raise the deck. Stop
cranking when the deck is aligned with the frame.
Max.
Cap.
1500
lbs.
Make sure people are away from the trailer before
raising the deck. Keep hands and feet away from
deck and rails. Hands and feet can get crushed
between the deck and frame.
3. Raise the latch handle. Put the latch clamp over
the clamp boss.
4. Push the latch handle down until the release lever
locks.
NOTE:
Do not over tighten winch. Winch is
intended to raise and lower deck — not to secure
load on trailer.
If not clamped, the deck may fall during travel.
Always clamp the deck before towing. Failure to
clamp the deck may result in injury, death, or
equipment damage.
