Switching Readings on the Multifunction Display
Press the
MENU
button to change information shown on the Multi Function display.
These will change in the order of:
Total Distance (ODO) → Single Trip Distance (TRIP).
Switching readings on the Speed Display
Hold the
MENU
and
UP
buttons to switch displayed readings on the Speed display
area. This will switch between Current Speed, Average Speed and Max Speed in that
order.
Entering the Display Settings Interface
To enter the settings interface press and hold the
UP
and
DOWN
buttons
simultaneously. With a parameter selected use the
UP
and
DOWN
buttons to add or
subtract from that value; this is how you change it. Short press the
MENU
button to
save your changes and advance to the next parameter. Exit the Settings Interface and
save all changed parameters at any time by holding the
UP
and
DOWN
buttons
simultaneously.
Display Setting Interface Options
•
P01: Backlight Brightness
o
1 is the darkest, 3 is the brightest.
•
P02: Mileage Unit
o
0 for KM/metric, 1 for Miles/Imperial.
•
P03: Voltage Class
DO NOT CHANGE
•
P04: Display Auto-off Time in minutes
o
Set to 0 to have display only turn off manually.
•
P05: PAS Grades
o
0 for 3 PAS Levels (0-3)
o
1 for 5 PAS Levels (0-5)
o
2 for 9 PAS Levels (0-9)
•
P06: Wheel diameter
o
This only needs to be changed if you put different sized wheels on the
bike. Unit is inches.
•
P07: Speed Sensor Signal
DO NOT CHANGE
•
P08: Speed Limit
o
Sets the max speed limit for the bike. Value can be set between 0-41 km/h
with 41 being the max value where there will be no speed limit.
•
P16: Odometer Reset
o
Press and hold the
UP
button for 5 seconds to reset TRIP odometer.
•
P18: Unused -
DO NOT CHANGE
