Note about the following display functions:
The display functions detailed in the following sections may not be enabled, so while they may appear,
they will have zero values or not appear all together.
Password
The symbol ‘PSd’ is displayed together with “0000”. Enter the password “0512” as described above.
Wheel diameter
The symbol ‘Wd’ is displayed. Use the
UP
or
DOWN
button to select your wheel diameter in inches.
The range is: 8/10/12/14/16/18/20/22/24/26/27/28/29 Selecting the wrong value will cause speed and
distance errors. Press the
POWER
button to save changes and advance to the next parameter.
Speed limit
The current speed limit value is displayed; the default value is 27Km/h. Use the
UP
or
DOWN
buttons
to modify the value from 10 to 99Km/h, although the upper speeds would probably not be achievable
due to restrictions within the motor and controller. Press the
POWER
button to save changes and
advance to the next parameter.
