page 4
4.
Remove the gravel deflector.
5.
Remove the plug of the speed
sensor.
The correct socket is marked red in
the picture.
The removed plug is two-pole and
grey.
6.
Put the plug of the bikespeed-cable
set into the socket that has
become available.
The plug only fits into this socket,
only in the correct direction.
The plug has to be inserted as far as it will go. The silicon seal may no longer
be visible. Upon delivery we apply some Vaseline onto the seals for
lubrication. If there is not enough lubrication, you may renew it.
Please advance with care when you insert the plug. Do not use force!
