13.
Use
To turn the camera off, press and hold the power button
A
3
for 3 seconds. You
will hear two beeps as before, the light will turn off and the camera will stop record-
ing.
When the camera reaches 5% power, it disable the recording function and only
allow the use of the light.
Recording Confirmation
As covered in the previous section the camera will automatically start recording
when it is turned on. This is confirmed with a chasing pattern LED around the lens
housing square.
Using The Camera
This product has the micro SD card pre-formatted and pre-installed for your
convenience. It is recommended that you fully charge the product before use for the
best first time experience.
Turning The Camera On/Off
To turn the camera on, press and hold power button
A
3
for 3 seconds. You will
hear two beeps. The camera will automatically start recording if there is a micro SD
card installed and the light will turn on.
Summary of Contents for 710418
Page 1: ...REAR BIKE CAMERA WITH LIGHT USER GUIDE ...
Page 25: ......
