19
Volume Control
As a safety precaution, is it recommended that you complete
the volume control settings prior to riding. In the event where
a volume adjustment is required while riding, extreme caution
must be taken to ensure safety and that bike control is
maintained at all times.
The [V+] and [V-] buttons on HOLA are for volume control. You
will hear a double tone during adjustment to indicate volume
changes are being made. When the volume is adjusted to the
highest or lowest level, a <beep> indicates the maximum or
minimum has been reached.
To adjust the volume of any function on any device connected
to HOLA, the function of that device must be turned on. For
example, to adjust the “talk” volume of the cell phone, the cell
phone must be in ”talk” mode. Similarly, to adjust the “music”
volume on the cell phone, the cell phone must be in “music”
playing mode. Each volume must be individually controlled. The
adjustment of one volume will not affect the volume of another
function. Because HOLA is designed for bikers, the volume
is louder than the average headset. It is advisable to test and
adjust the volume first before mounting onto the helmet.
**NOTE: when adjusting music volume on cell phone,
excessively fast presses may switch the cell phone into the
AVRCP function.
Summary of Contents for Hola
