Bikecomm HOLA-F10, Owner'S Manual, Page: 16 / 19

16
Reset to Manufacturer’s Settings
To reset the OpenRoad headset to the original manufacture’s default
settings, you can press [MFB] and [V+] simultaneously for about 7 seconds
until the LED turns red when the OpenRoad headset in the OFF state. Caution:
with this operation, all your previous settings will be lost.
Quick Reference for Operations
FUNCTION BUTTON
INSTRCUTION
Power ON
Press [MFB] until LED turns blue
Power OFF
Press [MFB] until LED turns red
Pairing
Press [MFB] for about 6 seconds until LED flashes red/blue alternatingly
Volume Up Press [V+]
Volume Down Press [V-]
VOX Level Up Press [V+] twice
VOX Level Down Press [V-] twice
Set Automatic Answer Press [V-] for about 7 seconds until LED turns green
Set Voice Answer Press [V+] for about 7 seconds until LED turns green
CELL PHONE TALK
Answer incoming call Press [MFB]
Automatic Answer Automatic answer after ringing for 5 seconds
Voice Answer
Speak into microphone directly, e.g.,
“
Hello.
”
End a call Press [MFB]
Reject a call Press [MFB] for about 3 seconds
Voice dial Press [MFB], and speak into microphone
INTERCOM WITH A HEADSET
Manual Activation
Press [MFB] until hearing <do> and release the [MFB].
Then, a <dodo> sound is heard to indicate successfully
establishing the intercom
Voice Activation (VOX)
Speak into microphone until hearing <do><dodo> to
indicate successfully establishing the intercom
End Intercom Stay silence for about 10 seconds or press [MFB]
MUSIC