Follow These Steps
Follow These Steps
Follow These Steps
Follow These Steps
1.
Insert Hanger Rod into desired position within
the plastic hub and slide back cover inside of
hub as shown in figure “A”.
2.
Snap item # 2a & 2b into item # 1.
3.
Snap item # 3 into item # 1.
4.
Slide item # 4a over item # 3
and secure with Quick-Release Pin # 6.
5.
Slide item # 4b over item # 5
and secure with Quick-Release Pin # 6.
6.
Snap item # 5 into item # 3.
7.
Lean assembled unit against wall.
Vertical post has to be parallel with wall.
Rubber feet of item # 2 should be equal
distance from wall.
8.
Adjust height of item # 4a so tires of bicycle are
off the ground.
9.
Adjust height of item # 4b so tires clear the lower bicycle.
10.
Always center bicycles on hanger arms (4a & 4b).
Figure A
Summary of Contents for HD
Page 1: ...ASSEMBLY INSTRUCTIONS ...
