manualshive.com logo in svg

Bike Fixtation Public Toolbox, Installation Instructions, Page: 4 / 4

Share
Download
Bike Fixtation Public Toolbox Installation Instructions Download Page 4

4 

 

 

5.

 

Install and tighten penta nuts.  Be careful not to over tighten. 

 

Optional Strike Plate 

 

1.  Locate the strike plate directly below the toolbox at a distance of 2” (5cm) off the floor.   

2.  If mounting to sheet metal, we recommend using #14 sheet metal screws no longer than 3/4" 

(20mm).  If mounting into concrete, we recommend using a ¼” masonry screw.  If mounting into 

wood framing, we recommend using #14 wood screws.  

 

Summary of Contents for Public Toolbox

Page 1: ...___________________ Installation Instructions for Bike Fixtation Public Toolbox Manual RevB Space Setbacks The Public Toolbox is very versatile in where it can be installed We recommend that it is placed in a location that allows a bicycle to access it either perpendicular or horizontal to the wall See Figure 1 below It is possible to mount a pump or wheel chock within this setback region ...

Page 2: ... 140cm from the ground If installing on a vending machine mount in a position that does not inhibit the door opening we usually mount on the left side of the machine 2 Choose your mounting surface and fasteners a If mounting to sheet metal we recommend using 14 sheet metal screws no longer than 3 4 20mm If mounting into concrete we recommend using a masonry screw b If mounting into wood framing we...

Page 3: ...use a 14 wood into 1 stud and toggle anchors into the other 2 holes that do not line up with a stud 3 Once the back plate is secured load the tools to the front cover as shown 4 Lift the front cover onto the back plate so that the tabs fit into the slots ...

Page 4: ...the strike plate directly below the toolbox at a distance of 2 5cm off the floor 2 If mounting to sheet metal we recommend using 14 sheet metal screws no longer than 3 4 20mm If mounting into concrete we recommend using a masonry screw If mounting into wood framing we recommend using 14 wood screws ...

Reviews:

No comments