09
Pairing the Bike-Comm with Bluetooth
devices
Listen to Audio with A2DP Bluetooth profile
•Pair your Bluetooth Audio with the Bike-Comm by holding
down the Phone/Play Key until the Blue & red LED’s flash
•If pairing is successful the blue LED will flash Slowly
•Push the Phone/Play key so start & stop audio
Tip: Use the supplied audio cable to connect your mp3 & GPS to
the Bike-Comm
Trouble Shooting
Bike-Comm dead
Bike-Comm loses connection
No audio
Feedback through speakers
Cannot connect to phone
Low battery, charge for 3
hours.
Push the reset button then re-
connect. Can be caused by
areas of high Radio energy
Check to see if all cables are
connected. Test with another
speaker set to confirm opera-
tion.
Reduce the volume or move
the microphone away from the
speakers
Test with a different model of
phone to see if you have a
compatible model
Your Local supplier is:
Visit us on the web at:
http://www.bike-comm.com
for more tips and technical help
10
Local Suppliers
