The Bike Barn – Standard Size Instructions
Page 3 of 4
The Bike Barn
#11-211 Schoolhouse Street, Coquitlam, B.C. Canada, V3K4X9.
Tel: 604-521-6444 Fax 604-521-3143
3. Support Ribs continued.
•
Note that the washers contact the base tube A to protect from wear of metal on metal.
•
Also note that the 3rd bolt from end of tube is 50mm long and reversed from other bolts.
Remember that the plastic washers go between the metal surfaces
TO LOCK BIKEBARN
SLIDE LOCK TUBE
OVER LOCK BAR AND
INSERT PADLOCK THROUGH
HOLE "A" (PADLOCK NOT SUPPLIED)
DETAIL-4
HOLE - 'A'
LOCK BAR
OPTIONAL
LOCK TUBE
OPTIONAL
REVERSED BOLT
8mm x 50mm LONG (2)
This bolt is inserted with
the head on the
INSIDE.
8mm x 45mm
BOLT, NUT & WASHERS
(10 Places)
GROMMET
PLACE GROMMET
OVER END OF SCREW
AND TIGHTEN NUT
FINGER TIGHTEN THIS 3rd NUT
DETAIL-5
(2 Places) B .
(2 Places)
A.
(8 Places)
C.
PADLOCK
NOT SUPPLIED
STANDARD MODEL - UPDATED: 11/30/01
(2 Places) I
.
These diagrams were developed over years of feedback from customers like you. If you have some new insights or just want to
tell us how the assembly experience was for you please send us an email to
and let us know.
We have a photo gallery on the site and we post pictures from customers that want to demonstrate their handy work. Take a digital
picture and send it to the email address above.
