Page 4 of 10
PB_2005_2_GB_ZP5000
2. Safety
(continuation)
2.8
Unacceptable modes of operation
The operational reliability of the machine supplied is only guaranteed if the machine is used in
accordance with its intended purposes as per section 1 - General - of the operating instructions. The
limiting values specified in the data sheet must on no account be exceeded.
2.9
Guidelines & standards
1., 2. and 3. guideline (see data sheet: R&N_2009_X_GB)
3.0
Notes on environmental protection and waste disposal
In correct operation with lubricants, the components are subject to the special requirements set by
environmental legislation.
The general requirements for lubricants are specified in the respective safety data sheets.
Used lubricants are hazardous forms of waste and therefore require special supervision in the sense of §
41 paragraph 1 sentence 1 and paragraph 3 no. 1 of KrW-/AbfG (Closed-Loop Waste Management Act).
Used oils must be handled in compliance with AltölV (Waste Oil Ordinance).
The devices or components contaminated with lubricant must be disposed of by a certified waste
management company.
Records of proper waste management must be filed in conformance to NachwV (Ordinance on Waste
Recovery and Disposal Records).
GENERAL PRODUCT CHARACTERISTICS
Multi-line
pump
up to 16 lubrication points
Maintenance-free
Pressure range up to 160 bar
Lubricant oil, grease, liquid grease
Surface signal grey RAL 7004
A.
PUMP TYPE ZP5000
B.
NUMBER OF OUTLETS
5 outlets
8 outlets
10 (5 + 5) outlets
16 (8 + 8) outlets
C. INSPECTION
Stage A
