bihl+Wiedemann BW 3023, User Manual

Page: 13 / 24

C-Series AS-i Master Module
Description
Subject to technical modifications; no responsibility is accepted for the accuracy of this information © Bihl+Wiedemann GmbH 13
Internet: www.bihl-wiedemann.de • Flosswoerthstr. 41 • D-68199 Mannheim phone: +49 621 33 996-0 • fax: +49 621 3 39 22 399
Is
s
ue da
te: 1
6
.4.2
015
5. Description
5.1 LED Indicators
5.2 Connection of the AS-i Master
5.2.1 Connection samples for the AS-i power supply
Indicator Color Description
AS-i powered Green
AS-i Master power
Peripheral fault
AS-i active Green Normal operation active
prj mode Yellow Configuration state
config error Red Config error occurred
Tab. 5-2.
AS-i Master
max. 5 A
PELV according to EN
50178 (Protective
extra low voltage)
AS-i
power
supply
-
+
AS-i Slave
-
+
AS-i Slave
-
+
AS-i Master
max. 8 A
PELV according to EN 50178
(Protective extra low voltage)
AS-i
power
supply
-
+
AS-i Slave
-
+
AS-i Slave
-
+
Attention!
In the wiring schemes above the current through the AS-i master must not
exceed 5 A.
10
10
AWG 24 ... 12
0,2 ... 2,5 mm
2
0,2 ... 2,5 mm
2
Torque 0,5 ... 0,6 Nm
Temperature rating for cable
105
o
C
Use copper conductors only