PC communication interface: square USB, easy to plug and unplug,
communication baud rate 115200
Support file format: G-code
Support machine structure: XYZ, delta, kossel, Ultimaker, corexy
Recommended software: Cura, Simplify3D, pronterface, Repetier-
host, Makerware
二、
SKR Motherboard Power
After the SKR motherboard is powered on, the red light in the
lower left corner will light up, indicating that the power supply is
normal; The DC SEL in the middle of the board is the power selector;
1) When using USB to power the motherboard, connect the +5V and
USB pins with the short-circuit cap;
2) When using 12V-24V power supply, connect the +5V and INT pins
with the short-circuit cap;
Note: You can connect [12V-24V power supply] and [USB] at the
same time. The printing process must be connected with the +5V
and INT pins with the short-circuit cap.
三、
SKR Motherboard and PC Communication
The SKR motherboard connects with the PC via the [USB]
interface and requires a driver to be used. It can be installed by
downloading the driver file named mapleDrv at
https://github.com/bigtreetech.
四、
SKR Motherboard Interface Description
1. SKR motherboard size chart
