3
BigTimeClocks
®
“Clock”
switches to time mode
when a count down /up is in
progress.
Press “clock” to exit setting
mode without saving.
Press
“Set”
in any mode to
edit values. Enter your values
and press
“Set”
again to save
settings and exit.
Snooze button
2. Remote control
Press
“Mute”
anytime to mute
clock sounds (
“mute”
will not
turn off alarm sounds)
Count up function
Countdown function
Press
“Alarm”
in any mode to
set alarms. There are a total of 8
alarm groups
Press
“B”
to stop the alarm
Press
“Z/D”
to activate an
hourly alarm, every hour on the
hour
12/24
hour format change
C/U
C/D
To access the alarms, press
“Alarm”
on your remote control.
The first digit position on the left of the screen blinks. This digit represents the alarm group. There are a
total of 8 alarm groups.
Select the alarm group (1 to 8), then press
“Alarm”
again. The 2 digit positions on the right of the screen
representing the on/off status of the alarm will blink. Press the
“Start/Stop”
button to change from an On
to an Off status. Press “Alarm” once more to move to the next alarm group. Press
“Set”
at any point to
save the alarm settings and exit setting mode.
To snooze an alarm press
“A”
. The snooze function will stop the alarm from beeping and allow an 8mn
pause until the alarm activates again. You can use the snooze function up to 10 consecutive times for any
given alarm.
If the sound is not stopped by pressing the
“B”
button or if the snooze function is performed 10
consecutive times, the alarm will sound for 5 minutes until it self-shuts.
An hourly alarm option is also available. Press
“Z/D”
and a clock alarm will sound every hour on the hour.
2.2 Alarms
